Start from one corner and align the artificial grass on the wall

Prepare the Wall:

• Clean the Surface: Ensure the wall is free from dust, dirt, and any loose particles. A clean surface will help the grass adhere better.
• Install Plywood or Backer Board: For a smooth and sturdy base, attach a plywood backboard to the wall. Secure the plywood with screws, ensuring it is level and firmly attached.

Cut the Grass to Size:

• Measure and Mark: Lay out the artificial grass and measure it according to the dimensions of your wall. Use a utility knife to make precise cuts. It’s advisable to cut slightly larger pieces and trim them down later for a perfect fit. For more creative uses of leftover pieces, check outingenious ideas for your artificial grass offcuts.

Attach the Grass:

• Position the Grass: Start from one corner and align the artificial grass on the wall. Use a level to ensure it’s straight.
• Secure with Screws or Nails: Use screws, nails, or staples to attach the grass to the plywood. Begin at the top and work your way down, securing the grass at regular intervals (every 30-45 cm) to prevent sagging or bubbling.
• Smooth and Secure: Press the grass firmly against the wall, smoothing out any wrinkles or bubbles. Use a roller or squeegee to ensure good contact between the grass and the backboard.